Wireless plug socket receiver Watts V25
The receiver does not measure temperature. It is used in combination with the Watts V22 thermostat, which switches it directly, or via the central control unit Watts V24 Wifi. The V25 receiver does not measure temperature. It is used in combination with the Watts V22 thermostat, which switches it directly, or via the Watts V24 Wifi central control unit.
The socket receiver can also be connected to the central unit without the V22 thermostat; in this case, the receiver operates in On/Off mode according to the time schedule of the central unit.The V25 receiver can also be connected directly to the V24 central unit without the V22 thermostat and will operate in On/Off mode according to the central unit‘s time schedule. The V25 is also equiped with a BOOST function, which keeps the output contact activated for 2 hours. The V25 will not respond to commands from the V22 / V24 control units until the boost period ends or the mode is cancelled.
Specification: switching contact 16 A, 230V / 50Hz, IP20 protection, operation status LED. The recommended minimum distance between receivers is 50 cm.
Watts V25
| Placement: | into the socket |
|---|---|
| Power supply: | 230 V/50Hz |
| Rating: | IP 20 |
| Insulation class: | II. |
| Number of channels (zones): | max. 3 |
| Switched current for each zone: | 16 A |
| Temperature range - room: | - |
| Temperature range - floor: | - |
| Temperature attenuation: | - |
| Heating indicator light: | Yes |
| Hysteresis: | - |
| Switch: | no |
| Programme back-up: | - |
channel FENIX
Wireless receiver Watts V23
Wireless room thermostat Watts V22
Watts V24 central unit
